Search Our Articles and Products

Go Back   Computer Care Center Tech Forum > PC security > PC Security
User Name
Password
Register Search Today's Posts Mark Forums Read


Reply
 
Search this Thread
Old 01-03-2007, 10:21 PM
k007 k007 is offline
PC Wizard
 
Join Date: Nov 2006
Posts: 1,569
Default How to hack into an Ethernet connection through Share

 

How to hack into an Ethernet connection through the Internet










The methods to hack into an Ethernet are numerous. One of the most basic methods is to gain access to the target's hard drives. This method does not require a high level of skill and yet is very effective. As long as you have a working knowledge of DOS, you are capable of hacking a computer that is not properly protected (ie.: the Windows default passwords are still operational).

If a loophole is discovered, a hacker can easily re-write, copy, delete and otherwise modify the files stored on your hard drive, The hacker may also gain access to the rest of the Ethernet by going through the aforesaid computer. In the Windows 98 series and Windows ME, there aren't many such loopholes; however, in Windows NT, Windows 2000 and Windows XP, there are many such loopholes. In all three of these operating systems, there exist DOS commands to view all files stored on the computer, even ones that are not normally being shared.
An example of this is to run the Command Prompt (click Run from the Start Menu and then run cmd) and then type "net share". A list of the drives follows and through this it is possible to gain access to all of your drives. Fortunately, it is not possible to directly access the drives yet.
You must provide a valid username and password to gain access to them. Unfortunately, in all three of these operating systems, when the OS is installed, the default username is administrator and the password is left blank or set to a default password that is easy to obtain, allowing for easy access if this default setting has not been changed.......

please take a look: thank you!

http://www.amazon.com/Computercares-Laptop-Repair-Workbook-

 

 

 



Last edited by k007 : 02-13-2013 at 11:39 PM.
Reply With Quote
Old Advertise
#2    
Old 02-13-2013, 11:41 PM
k007 k007 is offline
PC Wizard
 
Join Date: Nov 2006
Posts: 1,569
Default

 

How to gain access to a computer










The first step requires that you have a program called X Scan and the computer you are trying to hack must have either Windows 2000 or Windows XP. Open X Scan and select the NT-server option and then enter the IP address of the target computer(s).. X Scan will then scan all of the computers to determine which ones have weak points (ie.: default passwords) and then display a list of all of the computers where such weak points were found.
It will also list all of the usernames that were found to use simple passwords; however, we are only interested in the usernames that have administration power. For example, say we found a computer with the IP address of 192.168.0.1 with a username called "administrator" that has no password, The first thing is to try an IPC connection (IPC$). Start up the Command Prompt and then type "net use \\<IP of the computer>\IPC$ "<password>" /user:<username>".
For this example, the IP address is 192.168.0.1, the username is administrator and the password is blank, so the command for us would be: net use \\192.168.0.1\IPC$ "" /user:administrator (Do NOT omit the quotation marks, they are necessary). After you press enter, a message should appear that reads "The command completed successfully". You are now connected to the target computer and unless your target was expecting this, he/she will not notice since it does not display anything to the user of the target computer.
Now, for the second step, you must detect the drives on the target computer. To do this, you must turn his drives from private to shared. We will demonstrate by detecting the C drive of the example computer. In Command Prompt, type "net use <drive letter (you choose)> \\<IP of the computer>\<drive letter you want to view>$".
For eample, if we wanted to view his C drive as our own G drive, we would type: net use G \\192.168.0.1\c$. Once again, a message should be displayed stating that "The command completed successfully". Also, you should notice that a new drive (G) is now present on your computer. In reality, this drive is the C drive of the target. Any changes you do to this G drive will be done to his C drive. This would allow for the planting of Trojans, viruses and other harmful programs. You cannot name this virtual drive with the same name as a drive that already exists on your own computer.
If you do not what drives you have, just enter "*" in the place of the drive letter and the computer will automatically pick the most suitable drive letter (net use * \\192.168.0.1\c$).
To disconnect from the drive, type "net use \\<IP address>\<drive letter you viewed>$ /del" (for our example, this is: net use \\192.168.0.1\c$ /del).......

please take a look: thank you!

http://www.amazon.com/Computercares-Laptop-Repair-Workbook-

 

 

 


Reply With Quote
#3    
Old 02-13-2013, 11:44 PM
k007 k007 is offline
PC Wizard
 
Join Date: Nov 2006
Posts: 1,569
Default

 

How to gain access to a computer










Thus, the two lessons you should learn from this (other than how to hack), is how to prevent hacking by changing default passwords and downloading updates whenever they are available. You should also delete the drives from the net share by typing "net share" in the Command Prompt followed by net use \\<your own IP>\<name of shared drive> /del.
You should also turn off the Guest account to make it a bit harder for hackers to gain access to your computer. You can do this by typing "net user guest delete" in the Command Prompt. If you want to start using it again, just type "net user guest".......

please take a look: thank you!

http://www.amazon.com/Computercares-Laptop-Repair-Workbook-

 

 

 


Reply With Quote
Reply


Similar Threads
How to hack into an Ethernet connection through Share
How to hack a RAR file password?
Learn to Hack Yahoo Password
How to Hack Wireless Internet Connections
two practical methods to hack .rar password
Most Popular
How to hack into an Ethernet connection through Share
How to replace explorer.exe? and how to repair explorer file?
Solution for the virus drwtsn32.exe
How to check system port number?
Enable Sony PS Vita to play MKV movies smoothly
Highest Rating
7 skills to maintain the security of server
Java Get IP Address
How to convert MXF files to MOV/MP4/AVI/WMV/MPG/FLV etc on Mac?
Foxreal DVD Ripper - Convert DVD ISO/IFO to MP4 for Kindle Fire
About Audio Recording - Software of Recording Audio on Mac
New Articles
Import (4K) H.265 videos to Cyberlink PowerDirector
Encode and Decode H.265/HEVC videos to Samsung Galaxy Tablets
How to Make Scanned PDF Text Editable with OCR in PDFelement?
Recover iPhone / iPad / iPod touch System When Can't Turn On
How to Recover Deleted Text Messages from iPhone 7 Plus?

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

 

About Us | Terms & Conditions | Privacy Policies | Employment | Tech Forum | FAQs | Site Map| e Book| Link to Us

Copyright © 1995-2017 Computer Care Center  
vBulletin v3.5.2, Copyright ©2000-2017, Jelsoft Enterprises Ltd.